1 metric ton
Orders below 1 metric ton are reviewed against the grade, available stock, packing and freight cost.
1 metric tonStandard product MOQ
Free standard sampleBuyer covers international courier
15-25 daysTypical standard production lead time
COA · TDS · SDSQuality and technical documents
Image 1 of 5: Wood based powdered activated carbon sample pile
Typical sourcing range
Specifications buyers can use to prepare an RFQ
These are common or configurable manufacturing ranges, not a batch guarantee. Final acceptance values, methods and tolerances are confirmed in the signed product specification and batch COA.
| Raw material | Wood chips, sawdust or wood charcoal; phosphoric-acid or steam activation by grade |
|---|---|
| Form | Powdered activated carbon |
| Particle size | Common 200 or 325 mesh grades; target screen passing rate is specified by order |
| Iodine value | Typical configurable range: 800-1,050 mg/g |
| Methylene blue | Typical configurable range: 100-200 mg/g |
| Ash | Typical range: 5-18%; higher-quality decolorization grades can target <=10% |
| Moisture | Typically <=5% |
| pH | Typical phosphoric-acid grades: approximately 3-7, depending on washing |
| Bulk or tapped density | Typical reference range: 250-450 g/L; measurement method must be stated |
| Hardness | Not applicable to powdered activated carbon |
Send these fields for grade matching
Target liquid, color or contaminant, dosage process, filtration method, fineness, pH, quantity, packing and destination.
Application fit
Common use directions
- Municipal emergency dosing
- Industrial wastewater treatment
- Food and beverage liquid decolorization
- Chemical liquid purification
Custom manufacturing
Fields that can be reviewed
200/325 mesh, iodine value, methylene blue, pH, caramel decolorization, iron, lower phosphorus or ash and filtration behavior.
Test-method note: PAC particle size can be evaluated by ASTM D5158. Iodine value does not replace application-specific decolorization, filtration-time or methylene-blue testing.
Grade selection
How to specify Wood Based PAC for a bulk order
Use the application, equipment and agreed test methods to turn a typical product range into a contract specification.
Selection factors
- Define the target liquid, contaminant or color body, dosage point, contact time and downstream filtration method.
- State a minimum passing rate for 200 or 325 mesh instead of using a nominal mesh description alone.
- Use methylene blue, caramel or actual-liquid testing when larger molecules or color removal control the result.
- Review pH, ash, iron, phosphorus and filtration time where product purity or filterability matters.
Quality checks to discuss
- ASTM D5158 PAC particle size
- ASTM D4607 iodine value when applicable
- Methylene-blue or agreed decolorization test
- pH with a stated preparation method
- Bulk or tapped density with the method identified
Contract boundary: The signed specification identifies guaranteed values, methods, sampling and tolerances. Website ranges remain sourcing references.
Related selection pages
Continue from product form to operating conditions
Bulk purchasing
Standard commercial terms to include in the RFQ
Stock, final MOQ, production date, guaranteed values, packing cost, freight, payment terms and inspection scope are confirmed for the specific quotation and contract.
Standard samples
Standard samples are normally free; the buyer usually covers international courier cost. Sample quantity is matched to the product and test method.
Bag or FIBC options
25 kg bags, 500 or 1,000 kg FIBC bulk bags, and pallet options by order
COA, TDS and SDS
Document scope and timing are confirmed with the quotation, specification and shipment stage.
FAQ
Wood Based PAC purchasing questions
No. Particle hardness is not a meaningful acceptance field for powdered carbon. Use particle-size distribution, methylene blue, decolorization, filtration time, density and dispersibility instead.
Both are common sourcing directions. The contract should state the target mesh and minimum passing rate rather than only a nominal mesh name.
The target liquid, dosage and filtration method should be shared first so the sample grade and quantity match the intended bench test.